WM 68071 05/2021
MEDUMAT Standard
2
EN 25
3 Description
3.2 Control panel
3-2 Controls
No. Designation Description
1 Line power indicator
• Steady green light: Indicates that the device is
connected to line power.
• Not illuminated: The device is operating on
battery power and not on line power.
or
The device is in NVG mode.
2 Battery status indicator
• Steady green light: The battery is full or is not
being charged because it is outside the charging
temperature range.
• Flashing green light: The battery is being charged.
• Steady red light: The battery is defective or not in
the device.
• Not illuminated: The device is operating on
battery power and not on line power.
or
The device is in NVG mode.