98 EN MEDUMAT Standard
2
WM 68071 05/2021
4 Preparation and operation
4.14.2 Removing the SD card
Requirement An SD card is in the SD card slot.
1. Open the splash guard of the SD card slot.
2. Briefly press in the SD card.
The SD card is ejected slightly.
3. Remove the SD card.
4. Close the splash guard to protect the device from the ingress
of moisture.
Result The SD card is removed.
Incorrect handling may result in loss of data or damage to
the device!
If you remove the SD card whilst exporting service data or
updating the software of the device, data may be lost or the
device may be damaged.
Only remove the SD card after ensuring that no service data
exports or updates to the device software are in progress.
To Next Page
Loading...
Need help?
General
