7.
Switch on the combi oven.
8.
Make the following settings:
■
Date
■
T
ime
■
Language
Putting the appliance into use
1.
Start the cooking operation using the following cooking data:
■
'Combi-steam' operating mode
■
150 °C
■
10
minutes
2.
Check the following points:
■
Is the oven light illuminated?
■
Is the fan running?
■
Are there any leaks in the water supply and wastewater systems?
■
Does the temperature rise inside the cooking chamber?
3.
Start the cooking operation using the following cooking data:
■
'Steam' operating mode
■
100 °C
■
10
minutes
4.
Check whether steam is being generated in the cooking chamber
(Open the appliance door carefully).
5.
Only for Convotherm 4 injection appliances:
Use the pressure regulator to adjust the pressure to give the correct
reading at the pressure gauge in the steam generation water supply:
■
[kPa]
150 (1.5 bar)
6.
Start fully automatic oven cleaning using the cleaning profile for light
soiling.
7.
Check that the cleaning process runs without an error message.
Customer guidance and instruction
Instruct the user in all safety-related functions and devices. Instruct the user in how to operate the appliance, and complete
the checklist supplied with the appliance.
Warranty information
In order to be able to claim under the warranty for the combi oven, the appliance must be installed in accordance with the
instructions in this installation manual by a qualified service engineer from an authorized service company
. The manufacturer
must be in receipt of a fully completed checklist, enclosed with the appliance, before a warranty claim can be dealt with.
The warranty does not cover damage resulting from improper setup, installation, use, cleaning, use of cleaning agents, serv-
icing, repair or descaling.
To extend the spare parts warranty to 2 years, you need to register the appliance on the manufacturer's homepage
(www.convotherm.de) after installing the appliance.
7 Putting into service
Installation manual 71
To Next Page
Loading...
