1.3 Structure of customer documentation
Contents of the appliance documentation
Book type Contents
Installation manual
■
Describes how to move, set up and install the appliance, and how to put the appliance
into service
■
Describes the hazards and appropriate preventive measures relevant to all installation
tasks
■
Contains the technical data
User manual
■
Describes the working procedures and operating steps for cooking and cleaning
■
Contains the servicing schedule and information on troubleshooting
■
Describes the hazards and appropriate preventive measures relevant to operation
Operating instructions
■
Describes the appliance user interface
■
Contains instructions on how to use the software
Documentation for accessories
Please refer to the relevant instructions for the accessory concerned (e.g. recoil hand shower, hood, wheeled stand, stacking
kit) for information on how to install the accessory
.
1.4 About this installation manual
Who should read this manual
Name of target group Tasks
Start-up engineer
(Service engineer)
■
Overall responsibility for putting the combi oven into service
■
Instructing the user
Owner of the combi oven
or
owner's member of staf
f who
is responsible for the appli-
ance and for the operating
personnel
■
Made aware of all safety-related functions and devices of the combi oven by the start-up
engineer
■
Instructed by the start-up engineer on how to operate the appliance
■
Provides assistance as instructed with conveying the appliance within the establishment
and setting up the appliance.
See 'Owner obligations' on page
19 for further details
Equipment mover Conveying within the establishment
Service engineer
■
Setting up the appliance
■
Installation of the network port
■
Installing the fully automatic oven cleaning system (optional)
■
Putting the appliance into service and removing the appliance from service
Electrical installation engineer
■
Connecting the appliance to the building's electrical supply
■
Disconnecting the electrical connection
Plumber
■
Connecting the appliance to the building's water supply
■
Disconnecting the water connection
■
Connecting the appliance to the building's drain connection
■
Disconnecting the drain connection
Gas installation engineer Installing and removing the gas connection
Notation for decimal points
A decimal point is always used in order to achieve international standardization.
1 General information
Installation manual 9
To Next Page
Loading...
Need help?
General