Profiles
Profiles are variations of the Home tab. Each profile gives you access to a different set of
features. Choose the profile that best suits your needs.
The monitor offers multiple profiles—including Continuous Monitoring, Intervals
Monitoring, Spot Check, and Office—based on the configuration and any upgrade
licenses you purchase.
Continuous Monitoring profile
The Continuous Monitoring profile is designed for continuous patient monitoring.
Monitors configured with Oridion Microstream® Capnography provide continuous
monitoring of end-tidal CO2 (etCO2), fraction of inspired CO2 (FiCO2), respiration rate
(RR), pulse rate, and Integrated Pulmonary Index (IPI). Monitors configured with the
Nellcor pulse oximetry option provide continuous monitoring of oxygen saturation of
hemoglobin (SpO2) and pulse rate. Monitors configured with the Masimo rainbow SET
option may provide continuous monitoring of oxygen saturation of hemoglobin (SpO2),
total hemoglobin (SpHb or SpHbv), Acoustic Respiration (RRa), and pulse rate. Monitors
configured with EarlySense provide continuous monitoring of respiration rate (RR), pulse
rate, and patient movement.
The Continuous Monitoring profile also enables you to take manual temperature or NIBP
readings, to use alarms and timed intervals, and to use bi-directional controls to transmit
data between the monitor and a central station.
Note Patient data continuously streams to a central station only in the
Continuous Monitoring profile.
Note If "Allow profile change" is enabled in Advanced setting, the device
attempts to change to the Continuous Monitoring profile automatically
when a continuous sensor (CO2, RRa, EarlySense) is attached to the
device. (See "Change to the Continuous Monitoring profile: Automatic
profile change" later in this section.)
81
To Next Page
Loading...
