Western Digital Ultrastar DC HC310

To Next Page

To Previous Page

306

Western Digital Hard Disk Drive OEM Specification

Input Parameters From The Device

Sector Number (HOB=0)

LBA (7:0) of the address of the first unrecoverable error.

Sector Number (HOB=1)

LBA (31:24) of the address of the first unrecoverable error.

Cylinder Low (HOB=0)

LBA (15:8) of the address of the first unrecoverable error.

Cylinder Low (HOB=1)

LBA (39:32) of the address of the first unrecoverable error.

Cylinder High (HOB=0)

LBA (23:16) of the address of the first unrecoverable error.

Cylinder High (HOB=1)

LBA (47:40) of the address of the first unrecoverable error.

CCTO (Error, bit 0)

CCTO bit shall be set to one if a Command Completion Time Limit Out error has

occurred.

Main Page

Table of Contents3
Table 1 R/N and Model15
Glossary16
Head Disk Assembly19
Table 2 Formatted Capacity20
Table 3 Data Sheet21
Table 4 World Wide Name Assignment21
Drive Organization22
Performance Characteristics23
- Table 5 Average Seek Time23
- Table 6 Single Track Seek Time23
- Table 7 Latency Time23
- Table 8 Drive Ready Time24
- Table 10 4TB Mode Transition Times25
- Table 9 6TB Mode Transition Times25
- Figure 1 Plist Physical Format26
- Figure 2 Connector Location27
- Figure 3 Connector Pin Assignments27
- Signal Definition (SATA)29
- Table 11 Interface Connector Pins and I/O Signals29
- Figure 4 the Timing of COMRESET, COMINIT and COMWAKE30
- Out of Band Signaling (SATA)30
- Table 12 Parameter Descriptions30
- Figure 5 Limits of Temperature and Altitude31
- Table 13 Temperature and Humidity31
Environment31
- Figure 6 Limits of Temperature and Humidity32
- Storage Requirements32
- Figure 7 Start up Current Waveforms33
- Table 14 Input Voltage33
DC Power Requirements33
- Figure 8 Idle_C Standby_Y Recovery Current Waveform34
- Figure 9 Standby_Z Recovery Current Waveform34
- Power Supply Current35
- Table 15 SATA Power Consumption, 6TB, 4K35
- Table 16 SATA Power Consumption, 4TB, 4K36
- Table 17 SATA Power Consumption, 4TB, 512N37
- Table 18 Allowable Power Supply Noise Limits at Drive Power Connector38
- Table 19 Power Consumption Efficiency38
Reliability39
Figure 10 Top, Bottom, Side Views and Mechanical Dimensions, with Connector Position (SATA)40
Mechanical Specifications40
- Drive Mounting41
- Table 21 Random Vibration PSD Profile Break Points (Operating)42
- Table 22 Random Vibration (Rotational) PSD Profile Break Points42
Table 20 Physical Dimensions40
Vibration and Shock42
- Nonoperating Vibration43
- Table 23 Random Vibration PSD Profile Break Points (Nonoperating)43
- Nonoperating Rotational Shock44
- Table 24 Sinusoidal Shock Wave44
- Table 25 Rotational Shock44
- Table 26 Sound Power Levels45
Acoustics45
Safety46
Electromagnetic Compatibility47
- KC Mark48
Part 2. Interface Specification49
Terminology50
Command Register51
Table 27 Alternate Status Register51
Cylinder Low Register52
- Table 28 Device Control Register52
- Table 29 Device/Head Register52
- Table 30 Error Register53
- Table 31 Status Register54
- Table 32 Reset Response55
- Register Initialization56
- Table 33 Default Register Values56
- Table 34 Diagnostic Codes56
Sector Addressing Mode57
Power Management Feature58
- Power Management Commands59
  - SMART Function60
  - Error Log61
- Table 35 Power Conditions59
Security Mode Feature Set62
- Figure 11 Initial Setting63
- Operation Example63
- Figure 12 Usual Operation64
- Figure 13 Password Lost65
- Table 36 Command Table for Device Lock Operation -166
- Table 37 Command Table for Device Lock Operation -267
- Table 38 Command Table for Device Lock Operation -368
Host Protected Area Feature69
- Security Extensions70
Write Cache Function71
Power-Up in Standby Feature Set72
Streaming Feature Set73
SATA bist (Built-In Self-Test)75
SATA Interface Power Management76
Software Setting Preservation77
Serial ATA Optional Features78
- Table 39 Phy Event Counter Identifiers79
- Table 40 READ LOG EXT Log Page 11H Data Structure Definition82
- Table 41 NCQ NON-DATA - Command Definition83
- Table 42 Subcommand Field83
- Table 43 NCQ NON-DATA Log (12H) Data Structure Definition85
- Table 44 Rebuild Assist Log (15H) Data Structure Definition87
- Power Disable88
- Table 45 SCT Log Page and Direction89
- Table 46 Identify Device Information Word 20689
SCT Command Transport Feature Set89
- SCT Command Protocol91
- Table 47 Output Registers of SCT Command Using SMART91
- Table 48 Input Registers of SCT Command Using SMART91
- Table 49 Input Registers of SCT Command Using Write Log Ext92
- Table 50 Output Registers of SCT Command Using Write Log Ext92
- Table 51 Key Sector Format93
- Table 52 SCT Action Code List93
- Table 53 Extended Status Code94
- Table 54 Input Registers of SCT Data Transfer Using SMART95
- Table 55 Input Registers of SCT Data Transfer Using Read/Write Log Ext95
- Table 56 Input Registers of SCT Status Request Using SMART96
- Table 57 Input Registers of SCT Status Request Using Read Log Ext96
- Table 58 Data Format of SCT Status Response -197
- Table 59 Data Format of SCT Status Response -298
- SCT Command Set99
- Table 60 SCT Write same (Inputs)99
- Table 61 Output Registers of SCT Write same (Success)99
- Table 62 Output Registers of SCT Write same (Error)100
- Table 63 Error Recovery Control Command (Inputs)101
- Table 64 Error Recovery Control Command (on Puts)101
- Table 65 Feature Control Command (Inputs)102
- Table 66 Feature Control Command (Outputs)102
- Table 67 Feature Code List103
- Table 68 SCT Data Table Command (Inputs)104
- Table 69 SCT Data Table Command (Outputs)104
Table ID104
- Table 71 Data Format of HDA Absolute Temperature History Table -1105
- Table 72 Data Format of HDA Absolute Temperature History Table -2106
- Extended Power Conditions (EPC) Feature107
- Power Condition Timers108
Table 73 Extended Power Conditions Subcommands107
Table 74 Power Condition Ids107
Sanitize Device Feature Set109
- Sanitize Device Feature110
- Sanitize Device State Machine111
- Figure 14 Sanitize Device State Machines112
Trusted Computing Group Feature Set113
- Implementation Exceptions114
- Table 75 Vendor Specific Data for Level 0 Discovery115
- Encryption Algorithms115
- Table 76 WDC Default Values for 'Admin SP' C_PIN & 'Locking SP' C_PIN116
- TCG Enterprise SSC Tables116
- Table 77 WDC Implementation of K_AES_256 Table117
- Table 78 WDC Implementation of 'Locking SP' Access Control Table117
- Table 79 WDC Implementation of 'Locking Info' Table118
- Table 80 WDC Implementation of 'Locking SP' Locking Table118
- Table 81 Ports Functionality119
- Table 82 Ports Table119
- Firmware Download and Signing119
- Table 83 Modified 'Admin SP' ACE Table120
- Table 84 Modified 'Admin SP' Access Control Table (Part 1 of 2)120
- Table 85 Modified 'Admin SP' Access Control Table (Part 2 of 2)121
- Msid122
- Table 86 Command Table for TCG Enterprise Device Lock Operation -1123
- Locked and Unlocked Behavior123
- Table 87 Command Table for TCG Enterprise Device Lock Operation -2124
- Table 88 Command Table for TCG Enterprise Device Lock Operation -3125
- Table 89 TCG Enterprise SSC Commands Behavior -1126
- Table 90 TCG Enterprise SSC Commands Behavior -2126
- Table 91 TCG Enterprise SSC Commands Behavior -3126
- Table 92 TCG Enterprise SSC Commands Behavior -4127
- Table 93 TCG Enterprise SSC Commands Behavior -5127
- Table 94 TCG Enterprise SSC Commands Behavior -6127
- Error Codes128
PIO Data out Commands129
Non-Data Commands130
DMA Data in Commands and DMA Data out Commands131
- Table 95 Command Set132
- Table 96 Command Set -Continued133
- Table 97 Command Set -Continued134
- Table 98 Command Set (Subcommand)135
- Table 99 Check Power Mode Command (E5H/98H)137
- Table 100 Configure Stream Command (51H)138
- Table 101 Device Configuration Overlay Command (B1H)140
- Table 102 Device Configuration Overlay Features Register Values140
- Device Configuration Restore (Subcommand C0H)141
- Table 103 Device Configuration Overlay Data Structure142
- Table 104 DCO Error Information Definition143
- Table 105 Download Microcode Command (92H)144
- Table 106 Download Microcode DMA Command (93H)146
- Table 107 Execute Device Diagnostic Command (90H)148
- Table 108 Flush Cache Command (E7H)149
- Table 109 Flush Cache Ext Command (Eah)150
- Table 110 Format Track Command (50H)151
- Table 111 Format Unit Command (F7H)152
- Table 112 Identify Device Command (Ech)153
- Table 113 Identify Device Information154
- Table 114 Identify Device Information -Continued155
- Table 115 Identify Device Information -Continued156
- Table 116 Identify Device Information -Continued157
- Table 117 Identify Device Information -Continued158
- Table 118 Identify Device Information -Continued159
- Table 119 Identify Device Information -Continued160
- Table 120 Identify Device Information -Continued161
- Table 121 Identify Device Information -Continued162
- Table 122 Identify Device Information -Continued163
- Table 123 Idle Command (E3H/97H)164
- Table 124 Idle Immediate Command (E1H/95H)165
- Table 125 Initialize Device Parameters Command (91H)166
- Table 126 NCQ NON-DATA Command (63H)167
- Table 127 Abort NCQ Queue Subcommand (0H)168
- Table 128 Abort Type Field169
- Table 129 Deadline Handling Subcommand (1H)170
- Table 130 SET FEATURES Subcommand (5H)172
- Table 131 RECEIVE FPDMA QUEUED Command (65H)174
- Table 132 RECEIVE FPDMA QUEUED Subcommand Field174
- Table 133 READ LOG DMA EXT Subcommand (1H)175
- Table 134 SEND FPDMA QUEUED Command (64H)177
- Table 135 SEND FPDMA QUEUED Subcommand Field177
- Table 136 WRITE LOG DMA EXT Subcommand (2H)178
- Table 137 Read Buffer Command (E4H)180
- Table 138 Read Buffer DMA Command (E9H)181
- Table 139 Read DMA Command (C8H/C9H)182
Read DMA(C8H/C9H)182
- Table 140 Read DMA Ext Command (25H)184
- Table 141 Read FPDMA Queued Command (60H)186
- Table 142 Read Log Ext Command (2Fh)188
- Table 143 Log Address Definition189
- Table 144 Log Address Definition for Serial ATA189
- Table 145 General Purpose Log Directory190
- Table 146 General Purpose Log Directory for Serial ATA190
- Table 147 Extended Comprehensive SMART Error Log191
- Table 148 Extended Error Log Data Structure191
- Table 149 Command Data Structure192
- Table 150 Error Data Structure192
- Table 151 Defined Device Statistics Log Pages194
- Table 152 List of Supported Device Statistics Log Pages194
- Table 153 General Statistics195
- Table 154 Rotating Media Statistics196
- Table 155 General Error Statistics197
- Table 156 Temperature Statistics (Part 1 of 2)197
- Table 157 Temperature Statistics (Part 2 of 2)198
- Table 158 Transport Statistics199
- Table 159 Extended Self-Test Log Data Structure200
- Table 160 Extended Self-Test Log Descriptor Entry200
- Power Conditions Log201
- Table 161 Idle Power Conditions (Log Page 00H)201
- Table 162 Standby Power Conditions (Log Page 01H)201
- Table 163 Power Condition Log Description202
- Table 164 Power Condition Log Description - Continued203
- Table 165 Queued Error Log Data Structure Definition204
- Table 166 Read Stream Error Log205
- Table 167 Stream Error Log Entry205
- Table 168 Write Stream Error Log206
- Table 169 Identify Device Data Log207
- Table 170 List of Supported IDENTIFY DEVICE Data Pages207
- Table 171 Capacity Log Page208
- Table 172 Supported Capabilities Log Page209
- Table 173 Supported Capabilities Log Page - Continued210
- Table 174 Supported Capabilities Log Page - Continued211
- Table 175 Current Settings Log Page212
- Table 176 Current Settings Log Page - Continued213
- Table 177 Strings Log Page213
- Table 178 Security Log Page215
- Table 179 Serial ATA Log Page216
- Table 180 Serial ATA Log Page - Continued217
- Table 181 Serial ATA Log Page - Continued218
- Table 182 Read Log DMA Ext Command (47H)219
- Table 183 Read Multiple Commands (C4H)220
- Table 184 Read Multiple Ext Command (29H)221
- Table 185 Read Native Max ADDRESS (F8H)223
- Table 186 Read Native Max Address Ext (27H)224
- Table 187 Read Sector(S) Command (20H/21H)225
- Table 188 Read Sector(S) Ext Command (24H)226
- Table 189 Read Stream DMA Ext Command (2Ah)227
- Table 190 Read Stream Ext Command (2Bh)230
- Table 191 Read Verify Sector(S) Command (40H/41H)233
- Table 192 Read Verify Sector(S) Ext Command (42H)234
- Table 193 Recalibrate Command (1Xh)235
- Table 194 Request Sense Data Ext Command (0Bh)236
- Table 195 Sanitize Device Feature Set (B4H)237
- Table 196 Crypto Scramble Ext Command (B4H/0011H)238
Sanitize Device Feature Set (B4H)238
Table 197 Overwrite Ext Command (B4H/0014H)240
Table 198 Sanitize Freeze Lock Ext Command (B4H/0020H)242
Table 199 Sanitize Status Ext Command (B4H/0000H)244
Table 200 Security Disable Password Command (F6H)246
Table 201 Password Information for Security Disable Password Command246
Table 202 Security Erase Prepare Command (F3H)247
Table 203 Security Erase Unit Command (F4H)248
Table 204 Erase Unit Information248
Table 205 Security Freeze Lock Command (F5H)250
Table 206 Security Set Password Command (F1H)251
Table 207 Security Set Password Information251
Table 208 Security Unlock Command (F2H)253
Table 209 Security Unlock Information253
Table 210 Seek Command (7Xh)254
Sense Condition (F0H : Vendor Specific)255
- Table 211 Sense Condition Command(F0H)255
- Table 212 Set Features Command (Efh)256
- Set Transfer Mode257
- Advanced Power Management258
- Extended Power Conditions (EPC) Feature259
- Table 213 Restore Power Condition Settings Subcommand259
- Table 214 Go to Power Condition Subcommand260
- Table 215 Set Power Condition Timer Subcommand261
- Table 216 Set Power Condition State Subcommand263
- Table 217 Enable the EPC Feature Subcommand264
- Table 218 Disable the EPC Feature Subcommand265
- Table 219 Set Max ADDRESS (F9H)266
- Table 220 Set Max Set Password268
- Table 221 Set Max Set Password Data Contents268
- Table 222 Set Max Lock269
- Table 223 Set Max Unlock (F9H)270
- Table 224 Set Max Freeze Lock (F9H)271
- Table 225 Set Max Address Ext Command (37H)272
- Table 226 Set Multiple Commands (C6H)274
- Table 227 Sleep Command (E6H/99H)275
- Table 228 SMART Function Set Command (B0H)276
- SMART Subcommand277
- Table 229 Log Sector Addresses279
- Table 230 Device Attribute Data Structure281
- Table 231 Individual Attribute Data Structure282
- Table 232 Device Attribute Thresholds Data Structure286
- Table 233 Individual Threshold Data Structure286
- Table 234 SMART Log Directory287
- Table 235 SMART Summary Error Log Sector287
- Table 236 Error Log Data Structure288
- Table 237 Command Data Structure288
- Table 238 Error Data Structure288
- Table 239 Self-Test Log Data Structure289
- Table 240 Selective Self-Test Log Data Structure290
- Table 241 Selective Self-Test Feature Flags290
- Error Reporting291
- Table 242 SMART Error Codes291
- Table 243 Standby Command (E2H/96H)292
- Table 244 Standby Immediate Command (E0H/94H)293
- Table 245 Trusted Receive Command (5Ch)294
- Table 246 Trusted Receive DMA Command (5Dh)295
- Table 247 Trusted Send Command (5Eh)296
- Table 248 Trusted Send DMA Command (5Fh)297
- Table 249 Write Buffer Command (E8H)298
- Table 250 Write Buffer DMA Command (Ebh)299
- Table 251 Write DMA Command (Cah/Cbh)300
- Table 252 Write DMA FUA Ext Command (3Dh)301
- Table 253 Write DMA Ext Command (35H)303
- Table 254 Write FPDMA Queued Command (61H)305
- Table 255 Write Log Ext Command (3Fh)307
- Table 256 Write Log DMA Ext Command (57H)308
- Table 257 Write Multiple Command (C5H)309
- Table 258 Write Multiple Ext Command (39H)310
- Table 259 Write Multiple FUA Ext Command (Ceh)311
- Table 260 Write Sector(S) Command (30H/31H)313
- Table 261 Write Sector(S) Ext Command (34H)314
- Table 262 Write Stream DMA Ext Command (3Ah)315
- Table 263 Write Stream Ext Command (3Bh)318
- Table 264 Write Uncorrectable Ext Command (45H)321

Western Digital Ultrastar DC HC310 - Page 320

Table of Contents

Related product manuals