81
Western Digital Hard Disk Drive OEM Specification
9.18.2.2 Data Transfer
Once an SCT command has been issued, status can be checked and data can be transferred. Data transfer uses log
page E1h.
9.18.2.2.1 Read/Write SCT Data Using SMART
Command Block Output Registers
Number of sectors to be
transferred
Table 54 Input Registers of SCT Data Transfer Using SMART
9.18.2.2.2 Read/Write SCT Data Using Read/Write Log Ext
Command Block Output Registers
Table 55 Input Registers of SCT Data Transfer using Read/Write Log Ext
To Next Page
Loading...
