EasyManua.ls Logo

Whirlpool CS1250 - Forced Air Mode

Whirlpool CS1250
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Operation Instructions
Forced Air Mode
The appliance comes with a rear fan which distributes the hot air produced by the rear heater evenly inside the oven. Foods
baking paper onto the baking tray before cooking.
Temperature Time
Default Setting
30 mins
Setting Range
- 5 mins - 1 hours and 30 mins
Example: Set the cooking time to 40 minutes; cooking temperature is 210°C.
Steps:
1. In standby mode, turn the knob clockwise to
5. Setting is complete. The combi steamer will start cooking. (as shown in the diagram below)
65
Operation Instructions
(as shown in the diagram below). The display will jump to temperature setting automatically.
The icon will flash. Press the knob to confirm
2. Turn the knob until the temperature display shows 210°C. Press the knob to confirm (as shown in the diagram below).
The display will jump to hour setting automatically.
3. Press the knob to confirm 00 hour setting (as shown in the diagram below). The display will jump to minute
setting automatically.
4. Turn the knob until the minute display shows 40. Press the knob to confirm (as shown in the diagram below).
When cooking is completed, the “END” will be shown on display and an audio tone sounds. The
“Extended Cooking Time” icon (customer can increase the cooking time after cooking is completed) will flash.

Table of Contents

Related product manuals