EasyManua.ls Logo

Whirlpool CS1250 - Sterilization Mode

Whirlpool CS1250
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
Operation Instructions
Sterilization Mode
At sterilizing mode, high temperature 110°C is used to sterilize dinnerware, cutlery or feeding bottles. Always ensure that the
Temperature Time
Default Setting
30 mins
Setting Range Cannot be adjusted 5 mins - 6 hours and 59 mins
Example: Set the cooking time to 35 minutes.
Steps:
1. In standby mode, turn the knob clockwise to
75
Operation Instructions
The icon will flash. Press the
knob to confirm (as shown in the diagram below).
The display will jump to hour setting automatically.
2. Turn the knob to confirm the 00 hour setting (as shown
in the diagram below). The display will jump to minute
setting automatically.
3. Turn the knob until the minute display shows 35. Press
the knob to confirm (as shown in the diagram below).
4. Setting is complete. The combi steamer will start cooking
(as shown in the diagram below).
When cooking is completed, the “END” will be shown on
display and an audio tone sounds.
The “Extended Cooking Time” icon (customer can
increase the cooking time after cooking is completed)
and “Drip Tray Cleaning Reminder” icon (customer
has to clear up the water in the drip tray if any) will flash.

Table of Contents

Related product manuals