70
Operation Instructions
■
Defrost Mode
Temperature Time
Default Setting
30 mins
Setting Range
- 5 mins - 6 hours and 59 mins
Example: Set the cooking time to 1 hour and 40 minutes; defrosting temperature is 60°C.
Steps:
72
Operation Instructions
1.In standby mode, turn the knob clockwise to
to confirm (as shown in the diagram below). This
display will jump to temperature setting automatically.
The icon will flash. Press the knob
2. Turn the knob until the temperature display shows
60°C. Press the knob to confirm (as shown in the
diagram below). The display will jump to hour setting
automatically.
3. Turn the knob until the hour display shows 01. Press
the knob to confirm (as shown in the diagram below).
The display will jump to minute setting automatically.
5. Setting is complete. The combi steamer will start
cooking (as shown in the diagram below).
4. Turn the knob until the minute display shows 40.
Press the knob to confirm (as shown in the diagram
below).
When cooking is completed, the “END” will be shown on
display and an audio tone sounds.
The “Extended Cooking Time” icon (customer can
increase the cooking time after cooking is completed)
and “Drip Tray Cleaning Reminder” icon (customer
has to clear up the water in the drip tray if any) will flash.
To Next Page
Loading...
