Whirlpool CS1250 - Keep Warm Mode

73
Operation Instructions
■
Keep Warm Mode
Keeping food warm with hot air. Suitable for keeping cooked dishes warm.
Temperature Time
Default Setting
30 mins
Setting Range
- 5 mins - 3 hours and 59 mins
Example: Set the cooking time to 1 hours and 30 minutes; cooking temperature is 60°C.
Steps:
1. In standby mode, turn the knob clockwise to
76
Operation Instructions
The icon will flash. Press the
knob to confirm (as shown in the diagram below).
The display will jump to temperature setting
automatically.
2. Turn the knob until the temperature display shows
60°C. Press the knob to confirm (as shown in the
diagram below) The display will jump to hour
setting automatically.
3. Turn the knob until the hour display shows 01. Press
the knob to confirm (as shown in the diagram below).
The display will jump to minute setting automatically.
4. Press the knob to confirm “30” minute setting
(as shown in the diagram below).
5. Setting is complete. The combi steamer will start
cooking (as shown in the diagram below).
When cooking is completed, the “END” will be shown
on display and an audio tone sounds.
The “Extended Cooking Time” icon (customer can
increase the cooking time after cooking is completed)
will flash.