76
Operation Instructions
■
Descaling Mode
Water used in steaming mode may result in scale accumulated inside cavity and water pipe.
“Descaling” icon
will be on once combi steamer has reached 100hrs steam related cooking time to remind the user to run
the descaling programme mode. The light will stay on until the descaling is performed.
Descaling is carried out in three stages that involve one descaling process and two descaling and cleaning processes. The
user has to change the liquid in the tank 3 times during the entire cleaning process. It is also necessary to empty the drip tray
by cleaning up. Icon
will be lighted to remind cleaning up the drip tray is needed.
Also, descaler is required for this mode. Customer can select the Wpro descaler under Whirlpool brand. This product
can be used in steamer for cleaning limescale deposits effectively, optimizing machine performance and prolonging the
lifespan of the appliance. For more details, please visit our website: www.whirlpool.com.hk
For satisfactory results, follow the suggested dosage for descaler and water below:
Stage 1: Descaling. Running time is 30 minutes. Suggested dosage: 10ml descaling agent and 120ml pure water.
Stage 2: 1st descaling and cleaning process. Running time is 10 minutes. Suggested dosage: 130ml pure water.
Stage 3: 2nd descaling and cleaning process. Running time is 10 minutes. Suggested dosage: 130ml pure water.
Temperature Time
Default Setting 85°C 50 mins
Setting Range Cannot be adjusted Cannot be adjusted
Steps:
1. Stage 1: Descaling
A. Fill the water tank up to the level of the descaling
130ml icon with 10ml descaling agent and
120ml pure water.
B. In standby mode, turn the knob clockwise to
to confirm (as shown in the diagram below).
Descaling Mode. The icon will flash. Press the knob
C. The descaling mode will start (as shown in the diagram
below).
78
Operation Instructions
Stage 1 takes 30 minutes. When done, the time display
digits will flash and an audio tone will sound to indicate
stage 1 is complete. Drip tray cleaning reminder icon
will flash on the display panel to remind the user to
empty the drip tray.
E. Pour out the dirty liquid and put the drip tray back into
place.
Open the oven door, fill the water tank up to the level of
the descaling 130ml icon with 130ml pure water.
2. Stage 2: 1st descaling and cleaning process
B. Put the water tank back into place and close the oven
door. Descaling and cleaning will begin automatically.
When done, the time display digits will flash and an audio
tone will sound to indicate stage 2 is complete. Drip
tray cleaning reminder icon will flash on the display
panel to remind the user to empty the drip tray.
D. Pour out the dirty liquid and put the drip tray back
into place.
To Next Page
Loading...
