3. Stage 3: 2nd descaling and cleaning process
A. Open the oven door. Fill the water tank up to the level of the descaling 130ml icon with 130ml pure water.
B. Put the water tank back into place and close the oven door. Descaling and cleaning will begin automatically.
C. When done, the display will show “END” and an audio tone will sound.
Drip tray cleaning reminder icon will flash
on the display panel to remind the user to empty the drip tray.
D. Pour out the dirty liquid and put the drip tray back into place.
4. Descaling is complete.
Important:
1. The function of “Adjust the setting during Cooking Process / Increase the Cooking Time after Cooking is Completed” is
not available in this mode.
2. Descaling mode will be interrupted if the steps of descaling mode is taken in the wrong way (including pause during the
descaling process or open and close the oven door not following instructions etc). Please restart descaling mode and
follow the instructions in the manual.
79
Operation Instructions
To Next Page
Loading...
