White W3300 - Start Embroidering; Pass Thread Through Presser Foot; Lower Presser Foot and Start

U
IItILUUS
Start embroidering
After threading the needle,
pass
the
threadi
from the
top to
the bottom through the hole
of
the presser foot, and
gently
pull the end of
thej
thread.
2.
Lower
the presser foot
and press
the
“START/STOP” button
to
start the
machine
After sewing
5 — 6
stitches,
stop
the
machine
and raise the presser foot again. Trim off
any
excess thread
at
the
edge
of the design.
After trimming, lower
the presser foot and
press the ‘START/STOP”
button again
to start
the machine.
3.
The machine will
stop
sewing when it
has
completed all the stitching with the
current
thread color.