13
2. Operation
Information!
Do not open the reserve supply container cover unless the glass cover is closed, in order to avoid
damaging the glass cover.
When filling, make sure no extraneous materials (e.g. shreds of the pellet bags resulting from cutting
open the bags) enter the reserve supply container – they could block the rotary feeder!
Tip!
The reserve supply container should always be completely filled with pellets. This allows the inco-
ming pellets to drop into the container better, reduces the size of the conical part of the pile and
means that the container empties better.
Fold open the cover of the reserve supply container (Fig. 10) and fill the reserve supply container up to max. 1 cm
below the edge. Close the cover.
Fig. 10 Folding open the cover
2.3 Filling the reserve supply container
2.3.1 FireWIN Klassik – Manual filling
2.3.2 FireWIN Premium and Exklusiv – fully automatic filling
The reserve supply container is filled by the fully automatic pellet feed. Windhager Customer Service or the cus-
tomer service Partner will perform the first fill (start-up), take the boiler and its pellet supply into service and
familiarise the customer with the operation and cleaning of the boiler, with reference to the Operating Manual.
To Next Page
Loading...
