21
2. Operation
Fig. 41
Pellet consumption
total
Back
3.45
t
2.7.3 Pellet consumption total
The total amount of pellets consumed is displayed in tonnes.
Note!
The “Pellet consumption total” is a calculated value and can differ
from the actual value by ±15 %.
2.7.4 Flue gas temperature
This function displays the current flue gas temperature.
Fig. 42
Flue gas temperature
Back
114
°C
Information!
The flue gas temperature is measured directly on the flue outlet. It
may therefore deviate from a standard measurement.
2.7.5 Boiler temperature setpoint
The display indicates the boiler temperature setpoint as calculated by the con-
trol system. This setpoint is used to control the burner.
Fig. 43
Boiler temperature
setpoint
Back
63
°C
2.7.6 Current boiler output
The current boiler output is displayed in %. The boiler output (modulation mode)
can be set from 30 % to 100 %.
Fig. 44
Current
boiler output
Back
70
%
2.7.2 Operating hours
The total number of burner operating hours is displayed.
Fig. 45
Operating hours
Back
1.234
h
To Next Page
Loading...
