Chapter 4: Operating the Device
3. Align the pogo pin on UHF RFID module to the expansion port of Tablet PC; screw to fix
the module on tablet.
4.4.12.2 How to Use
1. Open Hottab utility by pressing (Menu) Button located on the front panel, OR
launching Hottab Utility application.
2. Choose “Device ON/OFF” and click on “Ext. Module”, and the setting utility will show
up as below:
3. Tap on the ON button.
4. Check the status color of the ON icon is green.
Trigger Setting
The default setting for UHF RFID trigger is Auto Scan. Under this setting, the
UHF RFID Reader will always be ready to scan tags.
1. When the UHF RFID tag is detected, the data will be read automatically.
2. User can define the UHF RFID scanning frequency from the drop-down
To Next Page
Loading...
