Winmate M101B - Page 62

61
Rugged Windows Tablet M101B/ M101BL User Guide
menu shown as below. The frequency can be from 1 second to 9 seconds.
Single Scan
User can also define the UHF RFID Reader scanning as SINGLE SCAN. Under
this setting, the UHF RFID Reader will be triggered only when user click on
“Send”.
Settings
Item
Description
Sound
The Sound check box defines whether a beep sound will come with the data
scanning.
Region
Basing on different regional regulations about UHF RFID frequencies, user can
switch frequency to NA (North America, 902-928 MHz) or EU3 (Europe, 865-868
MHz)from the drop-down menu shown as below.