Wittmann Tempro basic C 90 - Short Overview of Operation and Settings; Input and Displaymode; Status Display

Tempro basic C 90 & Tempro primus C 90
Page 24
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
7.2 Short overview of operation and settings
7.2.1 Input and Displaymode
Shift input and Display - mode with key
SET 1 = Set point value change with keys
or
SET 2 = Set point value change with keys
or
TOL = Tolerance +/- change with keys
or
operating hour counter 1 h = 1 unity
number + number x 1000 = number of operating hours
7.2.2 Status display
LED illuminate LED flashing
HEATING is active safety temperature limiter released
COOLING is active
PUMP is running motor protection relay released
UNIT is filling Leakage (filling time exceeded)
TEMPERATURE at Fahrenheit
LED °F dark: all temperature at °C