Wittmann Tempro basic C 90 - Maintenance and Care; Required Maintenance Intervals

Tempro basic C 90 & Tempro primus C 90
Page 35
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
1xMODE
Key
Display
Fun
c
tion
UP /
Down
1.2 – 1 200 / no parity
1.2 E 1 200 / even parity
1.2 o 1 200 / odd parity
4.8 – 4 800 / no parity
4.8 E 4 800 / even parity
4.8 o 4 800 / odd parity
9.6 – 9 600 / no parity
9.6 E 9 600 / even parity
9.6 o 9 600 / odd parity
19. – 19 200 / no parity
19. E 19 200 / even parity
19. o 19 200 / odd parity
1xMODE Adr Address
1xMODE
Key
Display
Fun
c
tion
UP /
Down
0 - 90 adjusted address
1xMODE - - - End
To exit the menu, simultaneously press the buttons and !
8 Maintenance
Please observe the required maintenance intervals, because this is the only way
of guaranteeing the proper functioning of the stabilizer and of granting the full
scope of warranties according to our terms of warranty.
Maintenance may be carried out by qualified personnel only.
By take over the temperature stabilizer of the operating company, the user
also takes over the responsibility of maintenance and inspection of the safety
devices.
We specifically point out that the safety instructions marked CAUTION should be
inspected as required in order to maintain the proper functioning of these
stabilizers.
CAUTION Every 2000 operating hours the maintenance alarm will be activated
and indicated by the flashing operating hours lamp. Acknowledge maintenance
alarm (in mode "Display of Operating Hours") by simultaneously pressing both
cursor keys.