WMF 1000 - Dispensing Hot Water; General Beverage Preparation; Cancel Beverage Preparation

20
Operation
Dispensing hot water
With the hot water function, you can dispense hot water, for instance for tea.
press briefly press and hold
1 glass hot water Hot water on request
Glass of hot water
> Place a suitable glass under the hot water spout
Press the hot water button 1x briefly
>
Another press of the hot water button ends dispensing prematurely.
Dispensing any quantity of hot water
Place a suitable glass under the hot water spout
>
Press the hot water button until the desired quantity has been dispensed >
General beverage preparation
Caution! Burning and scalding hazard.
The All-in-One spout and the hot water spout can get very hot. •
The beverages dispensed and the escaping steam are very hot.•
Never touch the spouts during or directly after dispensing beverages. •
Never touch the beverages, rinse and cleaning water or steam during or directly after •
dispensing beverages.
Cancel beverage preparation
You can cancel the current beverage being dispensed.
Press the off/c button
>
For beverages with more than one component, such as coffee and milk:
For beverages with several components, active dispensing can be interrupted. The next component will
continue to be dispensed.
Press the beverage button again
>
Hot water button
w Settings w Cup size (Cup volumes)
Page 26