Warm-up rinse/Coffee system rinse
The coffee system rinse is automatically performed when the machine is switched on or off.
A warm-up rinse can be called up on demand.
Place an appropriate container under the All-in-One spout
>
Issue the request with the P button >
Start the rinse with the care button >
The pipes of the coffee machine are rinsed with hot water.
Hot rinse water is emptied through the All-in-One spout.
After the rinse, the ready to operate display appears.
WMF Connect & Clean milk system rinse
The WMF Connect & Clean milk system rinse is unique world-wide; it allows you to easily maintain
perfectly clean systems for beverages with milk components and thus maintain consistently
enjoyable coffee.
Slide the All-in-One spout to the top position
>
>
Select the displayed program with the P button
The display reports the individual activities that must be done before the rinse.
If the All-in-One spout is not at the top position, then the display requests that the All-in-One spout be
moved all the way to the top.
Place an appropriate container under the All-in-One spout
>
Wipe off the outside of the milk hose with a clean, damp cloth >
Place the milk hose with the milk nozzle on the hot water spout and turn it clockwise to the stop >
Start the rinse with the care button >
warm up rinsing
OK: P browse: Care btn.
your selection pls
08:15 09.06.2008
Milk system rinse time approx. 30 seconds
milk system rinsing
OK: P browse: Care btn.
Place the milk hose on the hot water spout
and turn it clockwise to the stop.
Raise spout to topconnect hose
Start: Care button
To Next Page
Loading...
