WMF 1000 - Beverage Customization

27
Settings
If necessary the new setting can be tested with a dispensing test >
The taste and the composition of the beverage remains the same; only the volume is changed to your
wishes and to match the cup size.
As soon as the cup volume is set as desired, confirm the new value with the P button
>
Beverage settings
Here you can adjust the recipes of your coffee specialties according to your personal tastes.
The following settings are available:
Water volume •
Coffee strength•
*Milk volume•
*Sequence of dispensing of milk and coffee•
Pre-brew (aroma development)•
* Option only available for beverages with milk
Call up the beverage settings
Press the P button for > 2 seconds
>
Use the >
+
button to browse through to
Select the beverage setting program by pressing the P button
>
cup volume: 100 %
OK: P Test:bev.btn.
Technical Data
w Technical Data
Page 69
Select
P
Confirm
Care button
–
Page backward
Reduce value
+
Page forward
Increase value
The new values are saved when you exit
the program.
select program
browse: -/+
beverage settings
OK: P change: -/+