54
Messages and instructions
Bean hopper is empty
r e fi l l b e a n s
c o n fi r m b e v e r a g e
There are not enough coffee beans in the coffee
bean hopper
Grinding is interrupted.
Pour coffee beans into the bean hopper
>
Press the beverage button again >
The grinding process continues and the additional
coffee required for the brewing cycle is ground. The
selected beverage is then brewed.
Insert coffee grounds
insert coff. grounds
select beverage
The manual insert lid is open
Insert coffee grounds
>
Close the lid of the manual insert >
Select the desired beverage with the beverage >
button
This procedure can be cancelled with the off/c button.
Ground coffee that has already been inserted is
removed via the coffee
grounds container.
Change fi lter
your selection pls
replace water fi lter
The water fi lter must be changed
Change fi lter (see “Care” chapter)
>
To Next Page
Loading...
