Manual cleaning
All parts of the milk system must be cleaned thoroughly at least once a week.
Cleaning the milk system
All parts of the milk system must be cleaned thoroughly at least once a week.
Remove the water tank from the coffee machine
> [1]
Remove the hose from the milk container and the guide
> [2] [3]
Slide the All-in-One spout upward
> [4]
Operate the release on the back of the All-in-One spout > [5]
Pull down on milk foamer and remove
> [5] [6]
Remove the milk hose from the milk foamer
> [7]
Remove the milk nozzle from the milk hose
>
Twist out the air intake pipe > [7]
Unscrew the black cap from the air intake pipe
> [7]
Separate the upper and lower parts of the milk foamer. To do this, press the milk foamer against a
>
hard surface, with the spout pointing downward. [8]
The milk system consists of:
- All-in-One spout
- milk hose
- milk nozzle
1 2 3 4
5 6 7 8
To Next Page
Loading...
