WMF 1000 - All-in-One Spout Functionality

21
Operation
WMF All-in-One spout
The WMF 1000 is fitted with a unique system that has been standard in our professional machines
for many years: The All-in-One spout. It dispenses coffee and milk foam simultaneously, with variable
height adjustment so that you can place anything from an espresso cup to a latte macchiato glass
beneath it.
The adjustment height ranges from 67-135 mm.
The double milk foamer lets you prepare 2 portions of cappuccino at once: perfect coffee for two.
Adjusting the height
Hold the All-in-One spout firmly between your thumb and forefinger and move it >
to the desired height
Milk position of WMF All-in-One spout
Milk is dispensed at the top position of the All-in-One spout.
The top position is intended solely for milk dipsensing.
If the All-in-One spout is not at the top position when milk is selected:
The following messages are displayed alternately:
1x cup milk
Raise spout to top
1x cup milk
confirm beverage
Slide the All-in-One spout all the way to the top
>
Press the flashing milk button again briefly >
After dispensing milk, the All-in-One spout should be slid downward slightly. The display prompts
for this.
Milk foam position of WMF All-in-one spout
Milk foam is dispensed at all positions of the All-in-One spout, except the top position.
This also applies to coffee beverages that contain milk foam.
If the All-in-One spout is in the top position when milk foam, or coffee beverages that contain
milk foam, are selected:
The following messages are displayed alternately:
1x Latte Macchiato
Lower the spout
1x Latte Macchiato
confirm beverage
Slide the All-in-One spout downward slightly
>
Press the desired beverage button again >