41
Care
Descale coffee machine
Do not drink the descaling solution that comes out of the spout during descaling.
> Remove the milk foamer
Remove the red security seal from the milk nozzle by pressing lightly with your forefi nger
> [1] [2] [3]
The red seal on the milk nozzle must be
removed for descaling.
If the red seal is not removed, it can fall
into the catch basin during descaling.
Call up the care programs
w Care w General care programs
Page 36
Total duration of descaling approx. 37 minutes. The procedure may not be interrupted.
Press the P button
>
Empty the drip tray >
Remove the water tank from the coffee machine >
Remove the fi lter cartridge if a water fi lter is used >
Pour a whole bottle of WMF liquid descaling agent (750 ml) into the water tank >
Fill the water tank with water and close the lid >
Place an appropriate container (min. 3 litres) under the All-in-One spout >
Place another container (minimum 1 litre) under the hot water spout >
Start the descaling with the care button >
The descaling begins.
Remove milk foamer
w Cleaning the milk system
Page 44
1 2 3
machine descaling
OK: P browse: Care btn.
Place container underneath
Tip: Instead of two containers, you can use
a suffi ciently large container which fi ts
under both spouts.
To Next Page
Loading...
