WMF 1000 - Basic Settings

12
Start-up program
Basic settings
Press the >
–
and
+
buttons to set the desired values
Press the P button to confirm the values and inputs
>
After confirmation, the program jumps to the next point of the settings.
The new values are saved when you exit the program.
Time of day
Set the current time here
>
hh= hour (two places) mm= minutes (two places) ss= seconds (two places)
Press the P button to confirm the values
>
After confirmation, the program jumps to the next point of the settings.
The new values are saved when you exit the program.
Date
Set the current date here with the
>
–
and
+
buttons
dd= day (two places) mm= month (two places) yyyy = year (four places)
Press the P button to confirm the values
>
After confirmation, the program jumps to the next point of the settings.
Water hardness
Set the result of the carbonate hardness test here with the
>
–
and
+
buttons
Confirm the value with the P button
>
After confirmation, the program jumps to the next point of the settings.
Select
P
Confirm
Care button
–
Page backward
Reduce value
+
Page forward
Increase value
The new values are saved when you exit
the program.
Time hh:mm:ss
OK: P change: -/+
date dd:mm:yyyy
OK: P change: -/+
Water hardness: 13-16
OK: P change: -/+
Carbonate hardness test
w Accessories and spare parts
Page 68