Wood-mizer LX450 Series - Page 84

Maintenance
Safety Devices Inspection (CE Version Only)
3
3-8 doc041620 Maintenance
 Try to start the main motor; it should remain stopped;
 Close the blade housing cover;
 The motor should remain stopped until it is restarted with the START button.
4. Inspection of the Up/Down Limit Switches
 Move the saw head up until the upper limit switch is activated. The saw head should be
stopped. Now the saw head should move downwards only.
 Move the saw head down until the lower limit switch is activated. The saw head should be
stopped. Now the saw head should move upwards only.