wsm STW37 - Page 101

ENGINE
STW34, STW37, STW40, WSM
1-S22
Steering Wheel and Panel Under Cover
1. Remove the covers (3).
2. Remove the steering wheel cap.
3. Remove the steering wheel mounting nut (1) and remove the
steering wheel (2) with a steering wheel puller (Code No.
07916-51090).
4. Remove the panel cover (4).
(When reassembling)
9Y1211109ENS0022US0
Instrument Panel
1. Remove the instrument panel mounting screws and disconnect
the instrument panel connector (2). Then remove the instrument
panel (1).
2. Disconnect the combination switch connector (6), main switch
connector (3) and hazard switch connector (4).
3. Remove the under cover (5).
9Y1211109ENS0023US0
Tightening torque
Steering wheel mounting
nut
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
(1) Nut
(2) Steering Wheel
(3) Cover
(4) Panel Cover
(1) Instrument Panel
(2) Instrument Panel Connector
(3) Main Switch Connector
(4) Hazard Switch Connector
(5) Under Cover
(6) Combination Switch Connector
KiSC issued 11, 2014 A