wsm STW37 - Separating MID Case

TRANSMISSION
STW34, STW37, STW40, WSM
3-S48
(5) Separating Mid Case
Separating Mid Case
1. Remove the transmission oil filter bracket (4) with suction pipe
(3).
2. Remove the counter shaft and coupling (2).
3. Remove the mid case mounting screws and nuts to separate
the mid case (1) from the transmission case.
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to the
joint face of the mid case and transmission case.
9Y1211109TRS0036US0
Tightening torque
Mid case mounting screw
and nut
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
(1) Mid Case
(2) Counter Shaft and Coupling
(3) Suction Pipe
(4) Oil Filter Bracket
KiSC issued 11, 2014 A