Wulfsberg C-5000 User Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 5-13
Rev. A Section 5 – Configuration and Programming
Sep 2001
Using The Edit Page
The EDIT PAGE allows the operator to temporarily change properties of a preset channel, and permanently change
properties of a manual channel. Precisely which properties can be changed varies with channel and radio type. For
example, transmit power can only be changed on RT-5000 radios, because the other radios do not have variable
power capability. The following illustration is an example of what the EDIT PAGE looks like. Your C-5000’s
display may appear differently depending on the currently selected channel and its associated properties.
..1
→
→→
→
506.987R T.17 FM
S H 506.987T T.17 ..
Channel Identifier field – This displays the currently selected channel, i.e. the channel you are editing.
Direct Mode Status Field – This field displays the direct mode indicator symbol (→) when the current channel is a
direct channel, or the channel has been forced to be a direct channel by way of the DIR button.
Receive Frequency Field – This field displays the current channel’s receive frequency.
Receive Tone Field – This field displays the current channel’s receive tone.
Modulation Type Field – This field displays the current channel’s modulation type. The modulation types are
displayed as AM, FM, P (P25), and TK (trunking).
Channel Bandwidth Field – This field displays the current channel’s bandwidth. Bandwidths are displayed as S
(standard), W (wide), X (extra wide), and N (narrow).
Transmit Power Level Field – This field displays the current channel’s transmit power level. Power level is
displayed as HI for high power or LO for low power.
Transmit Frequency Field – This field displays the current channel’s transmit frequency.
Transmit Tone Field – This field displays the current channel’s transmit tone.
Encryption Key Field – This field displays the current channel’s transmit encryption key. The encryption key will
display as a number between 1 and 16, or “..” if no key has been specified for the channel.
Editing a Preset Channel
To temporarily change the properties of a preset channel, do the following.
Bandwidth
Power Level
Transmit
Frequency
Transmit
Tone
Encryption
Key
Direct Mode
Indicator
Channel
Receive
Frequency
Receive
Tone
Modulation

Wulfsberg C-5000 Specifications

General

Brand	Wulfsberg
Model	C-5000
Category	Controller
Language	English