C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 5-39
Rev. A Section 5 – Configuration and Programming
Sep 2001
ENTER NEW PASSWORD 1
#=.... <ENTER>
• Use the keypad to input the new password, and press the ENTER button.
BACK VERIFY INPUT
#=.... <ENTER>
• Use the keypad to re-input the new password, and press the ENTER button. This second entry is for
verification. If you entered an inconsistent password, your input will be erased, and you may try again. Once
you have entered the same password on both pages, it will be changed, and the display will revert to the
following.
SETUP: 2=NEXT 3=BACK
ENTER=CHG PASSWORD 1
Setting Miscellaneous Configuration Options
This section drills down into the miscellaneous setup sub-menu pages. Refer to the section on configuring the C-
5000 for details on how to reach these menu pages. We pick up at the following display page.
SETUP: 2=NEXT 3=BACK
ENTER=SETUP MISC.
• Press the ENTER button to begin configuring miscellaneous options.
SETUP: 2=NEXT 3=BACK
SYSTEM ENCRYPT -NO
• Use the cursor/value knobs to tell the C-5000 if external encryption is available (Future function). This option
pertains only to a separate encryption device, i.e. one that is not part of the C-5000 or any of the transceivers. A
KY-58 device is a typical example. Press the MODE button to display the next menu page.
To Next Page
Loading...
Need help?
General
