Page 5-26 Publication No. 150-041118
Section 5 – Configuration and Programming Rev. A
Sep 2001
END KVL LOAD
RADIO #1 IN KVL MODE
• Connect the Key-loader device to the transceiver data port. Load the desired keys using the procedure for the
key-loader as prescribed its manufacturer.
• Press the UPPER SOFT KEY to acknowledge the key load is complete. The display will return to the main
KVL LOAD PAGE, allowing you to select another radio and/or digital transceiver module to load.
• When finished loading the keys to all desired modules, press the HOME button to return to the HOME PAGE.
To Next Page
Loading...
Need help?
General
