iii
This guide for use by qualified installers only
About This Guide
Purpose
The purpose of this Installation Guide is to provide
explanations and procedures for installing and configuring
the Truecharge™ 2 Series Battery Charger.
Scope
The Guide provides safety guidelines, procedures for
installing the battery charger, as well as information on
configuring the battery charger. It does not provide details
about particular brands of batteries. You need to consult
individual battery manufacturers for this information.
Refer to Truecharge™ 2 Battery Charger Owner’s Guide
(doc. part number: 975-0401-01-01) for operational
instructions.
Audience
The Guide is intended for qualified installers who need to
install and configure any model unit of the Truecharge™ 2
Series Battery Charger. The installer should be a qualified
technician or electrician.
Organization
This Guide is organized into two chapters and one appendix.
Chapter 1 describes the standard features of a Truecharge™ 2
Battery Charger, as well as its protection features. It also
provides information on the different parts of the
Truecharge™ 2 Battery Charger including information on the
optional remote panel.
TC2 Series BattChg Install Guide.book Page iii Monday, June 30, 2008 3:18 PM
To Next Page
Loading...
Need help?
General
