Xerox 2510 User Manual

REP 8.4 Fabric Guide
Replacement
1. (Figure 2): lnstall the retaining rod and the
I Parts List on (2510) PL 8.2 (251 5) PL 8.4
CAUTION
weight bar into the fabric guide.
m
STEP 1 A : The coloredstrip on the fabric guide
2. The remainder of the replacement is the
Removal
is closer to the edge with the corner cut. The
reverse of the removal procedure.
corner cut must be positioned toward the
back
1. WARNING: Disconnect power cord. of the copier to avoid damage to the fabric
guide and possible media jams. Install the
2. (Figure 1): Remove the fabric guide.
retaining rod on the side opposit the corner cut.
SLOT
IOWN REMOVED
A
INSTALL THE
RETAINING ROD B
INSTALL THE
COLORED STRIP
Figure 2.
Install the Retaining Rod and the Weight
Bar into the Fabric
Guide
7192
REP 8.4 4-1 o 251 01251 5

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English