Xerox 2510

2510 Change Tag / lndex
Introduction
All important modifications are identified by a
Tag number on a matrix label attached to each
2510 inside the side cover.
This section describes all of theta
s as well as
P
multinational applicability, classi cation
codes, and permanent or temporary
modification information.
Classification Codes
A tag number may be required to identify
differences between parts that cannot be
interchanged, or differences in diagnostic,
repair, installation, or adjustment pro5edures.
A tag number may also be required to identify
the resence of optional hardware, firmware,
or
i /' mandatory modifications have been
installed. Each tag number
is given a
classification code to identify the type of
a
change the tag has made.
CODE CLASSIFICATION
M Mandatory
S Situational
R Repair
0 Optional
N
Not installed in the field
7/92
Change Tag Index 6-38 2510