Xerox 2510

REP 10.1 Heat Rod
I Parts List on PL 10.2
REMOVE
HEATROD
A3 1.
Removal
CAUTION
Fuser may be hot, allow fuser to cool
WARNING:
before removing the xerographic module.
Disconnect the power cord.
1. Remove the xerographic module (REP 9,1)
2. (Figure 1): Remove the heat rod (REP1O.l).
E
REMOVE
CONNECTOR
THERMOSTAT
DISCONNECT
Figure 1. Remove the Heat Rod
7/92
251012515 4-31
REP 10.1