TAG: 12
CLASS: N
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO: 64600461 3 AND UP
RX:
60J322206 AND UP
NAME AND PURPOSE:
FRAME MODIFICATION: TO REDUCE PHOTORECEPTOR
DAMAGE DURING SHIPPING AND HANDLING. THE FRAME
HAS BEEN MODIFIED AND A SEAL
(35K1320) WAS ADDED
BETWEEN 'tl-1E FRAME AND
'1
I.IE PI~10T01tECEPTOR.
I
KIT NUMBER: NONE
REFERENCE: PL 6.1
TAG:
13
CLASS:
R
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO:
64GOO57W AND UP
RX: 601322755 AND
UP
NAME AND PURPOSE:
WEIGHTED MOTION SENSOR (130K16232):
MINIMIZES VARIATION IN THE REGISTRATION
01:
COPIES.
KIT NUMBER: NONE
1
REFERENCE:
PL
8.5
TAG: 14 TAG: 16
CLASS: R
CLASS:
0
(USO);
2
(RX)
USE: US0 AND RX
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO: 6460073 15 AND
UP
RX: 601322984 AND UP
MANUFACTURING SERIAL NUMBERS:
USO: 64GOll535
RX: 60J329100
NAME AND PURPOSE:
NAME AND PURPOSE:
FUSER REPAIR KIT TO UPGRADE MACHINES TO IMPROVE
COPY FEED-OUT KIT TO ENHANCE POLYESTER FILM FEED
THE FUSING ON THE EDGES
OF
COPIES.
OUT AND REDUCES OIL DEPOSITS ON COPIES
BY
ADDING
WARNING: DO NOT USE ANY TAG
14
PARTS SEPARATELY
AN ANTI-STATIC RnU$ll QN
Tilt:
FRONT COVER AND
UNLESS
THE
MACHINE
HAS
BEEN UPGRADED TO
TAG
14,
CIlANGlNG
THE
STRIPPER PINGERS.
THESE PARTS ARE NOT INTERCHANGEABLE ON PRE-TAG
14
MACHINES.
I
KIT NUMBER: 606K280 (US0 AND RX)l
REFERENCE: NONE
KIT NUMBER:
USO:600K6780
RX:600K6790
TAG: 17 NOT USED
I
REFERENCE: NONE
TAG: 15
TAG: 18 NOT USED
CLASS:
R
USE: US0 AND RX
TAG:
19
NOT USED
MANUFACTURING SERIAL NUMBERS:
TAG: 20 NOT USED
USO: 64G000820
RX: 601324000
NAME AND PURPOSE:
UPPER REAR COVER UPGRADE TO INSTALL MORE
RELIABLE FASTENERS ON THE UPPER REAR COVER.
KIT NUMBER: USO:600K6830
REFERENCE: PL 14.1
7/92
2510
6-41
Change Tag Index
To Next Page
Loading...
Need help?
General