Xerox 2510

E F
Replace the Toner Solenoid (REP 9.8).
Perform the Detoning Procedure
(General Procedures, Section
6).
I
Go to Flag 3, and check the wires for an open
or short circuit.
I There is a short circuit.
Replace the Toner Solenoid (REP
9.8).
I;
I I
Perform the Detoning Procedure
(General Procedures).
If the problem
persists replace the Control PWB.
I Repair the wires.
I Perform the Detoning Procedure (General
Procedures, Section
6).
8/96
251 5 2-33 J - High Toner RAP