Xerox B1022

Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks are present in copies made from the
document feeder only.
There is debris on the document glass. When
scanning, the paper from the document feeder
passes over the debris, creating lines or streaks. Clean
all glass surfaces with a lint-free cloth.
Spots are present in copies made from the document
glass.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth.
The reverse side of the original appears on the copy
or scan.
Select Background Suppression.
The image is too light or too dark. To lighten or darken the image, use the Lighten/
Darken tab in either the Scan To or Copy function.
If the problem persists, for online support information, go to www.xerox.com/office/B1022_
B1025support.
Xerox
®
B1022 Multifunction Printer
User Guide
147
Troubleshooting