Xerox DocuPrint C1190 FS - Page 226

Index
Index-2
color calibration
adjusting, 10-17
automatic adjustment, 10-17
determining values, 10-18
enabling/disabling automatic
adjustment, 10-19
manual adjustment, 10-17
printing the Color Registration
chart, 10-17
color calibrationn
entering values, 10-18
color saturation
adjusting, 6-6
computer
sending faxes from, 8-5
configuring the network address, 4-5
connection
Ethernet, 4-3, 4-4
Ethernet and USB, 4-3
USB, 4-4
consumables, 11-18
ADF pad, 11-15
ADF roll, 11-15
drum cartridge, 11-7
error messages, 10-23
feed roller, 11-13
fuser unit, 11-11
print cartridges, 11-5
copy
basic settings, 6-3
basics, 6-2
black-and-white, 6-3
collating copies, 6-10
color, 6-3
default settings, 9-4
image adjustments, 6-5
image placement adjustment, 6-8
lighten or darken an image, 6-5
options, 6-3
output adjustments, 6-10
printing multiple pages on a sheet, 6-8
selecting a tray to use, 6-4
selecting color or black-and-white
copies, 6-3
setting default copy tray, 6-3
setting default settings, 6-4
specifying document type, 6-4
copy margins
setting, 6-9
copy quality
problems, 10-16
copying
adjusting color saturation, 6-6
creating
individual speed dial entry, 8-7
creating an administrator password, 3-2
custom paper
defining size
with PCL driver, 5-33
custom size paper, 5-33
printing from Tray 1, 5-34
supported for Tray 1, 5-33
D
default settings, 9-4
copy, 9-4
fax, 9-5
scan, 9-5
delay sending a fax, 8-13
DHCP
enabled by default, 4-6
enabling on the control panel, 4-6
enabling with CentreWare IS, 4-6
manually setting the printer’s IP
address, 4-7
setting the printer’s IP address
dynamically, 4-6
dial directory
report, 8-18
dialing fax numbers
inserting characters, 8-4
inserting letters or numbers, 8-4
inserting pauses, 8-4, 8-18
directory
individual, 8-7
document
feeder, 6-2, 8-4
glass, 6-2, 8-4
document glass, 5-4
document type
selecting, 6-4
drivers
available, 4-9
description, 4-9
installing, 4-9