Xerox DocuPrint CM205 b - Scan Defaults; File Format; Color Button Set

Using the Operator Panel Menus and Keypad 166
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
Scan Defaults
Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
•Color
Purpose:
To set the color mode.
Values:
• Color Button Set
Purpose:
To assign color mode to the Color Mode button.
Values:
0mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
PDF*
TIFF
JPEG
Black & White Scans in black and white mode. This is available only when File
Format is set to PDF or TIFF.
Color* Scans in color mode.
B&W Button Black & White* Scans in black and white when Black & White is selected
for a color mode.
Grayscale Scans in gray scale when Black & White is selected for a
color mode.
Color Button Color* Scans in color when Color is selected for a color mode.
Color(Photo) Scans in color (photo) when Color is selected for a color
mode. This is suitable for photographic images.