143 Scanning
Scanning Using the WIA Driver
Your printer also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is
one of the standard components provided by Windows XP and later operating systems and works with
digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan an image
and easily manipulate those images without using additional software.
The following procedure uses Windows XP as an example.
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
1 Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 114
2 Start the drawing software, such as Paint for Windows.
NOTE:
• When you use Windows Vista, use Windows Photo Gallery instead of Paint.
3 Click File From Scanner or Camera (Paint button From scanner or camera for Windows
Server 2008 R2 and Windows 7).
The Scan using FX DP CM205 b (WIA) window appears.
NOTE:
• The illustration may vary for different operating systems.
4 Select your scanning preferences and click Adjust the quality of the scanned picture to
display the Advanced Properties dialog box.
5 Select the desired properties including brightness and contrast, and then click OK.
6 Click Scan to start scanning.
7 Click Save As from the File menu.
8 Enter a picture name, and select a file format and destination to save the picture.
To Next Page
Loading...
Need help?
General