59 Installing the Print Driver
USB Connection Setup
The following procedure uses Windows XP as an example.
1 Connect the computer and the printer with the USB cable.
2 Turn on the printer.
NOTE:
• If Found New Hardware Wizard appears, click Cancel at this time.
3 Click Installing Drivers and Software.
4 Select Personal Installation, and then click Next.
5 Click Install.
6 Select Typical Installation(recommended) to perform the standard installation, and then click
Install.
For the custom installation, select
Custom Installation
, and then click
Next
. Select the items that
you want to install, and then click
Install
.
7 Click Finish to exit the wizard. If necessary, click Print Test Page to print a test page.
To Next Page
Loading...
