161 Using the Operator Panel Menus and Keypad
• Service Lock
Purpose:
To specify whether to enable each of the printer services or to require a password to use the services,
and to set or change the password.
See also:
• "Limiting Access to Copy, Scan and Print From USB Memory Operations" on page 176
NOTE:
• You can access to the items under Service Lock only when Panel Lock Set is set to Enable.
Values:
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
•Port Status
Purpose:
To enable or disable the USB interface. The change becomes effective after the printer is turned off
and then on.
Values:
COPY Unlocked* Enables the COPY service.
Locked Disables the COPY service.
Password Locked Enables the COPY service with a black and white mode, but
requires a password.
Color Pass.
Locked
Enables the COPY service with a color mode, but requires a
password.
SCAN Unlocked* Enables the SCAN service.
Locked Disables the SCAN service.
Password Locked Enables the SCAN service, but requires a password.
Print from USB Unlocked* Enables the Print From USB Memory service.
Locked Disables the Print From USB Memory service.
Password Locked Enables the Print From USB Memory service with a black and
white mode, but requires a password.
Color Pass.
Locked
Enables the Print From USB Memory service with a color
mode, but requires a password.
Change
Password
0000*–9999 Sets or changes the password required to use the COPY,
SCAN, and Print From USB Memory services.
Disable Disables the USB interface.
Enable* Enables the USB interface.