Copying 120
Reduce/Enlarge
You can reduce or enlarge the size of a copied image, from 25% to 400%.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
• This item is available only when N-Up is set to Off or Manual.
1 Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 114
2 Press the (Copy) button.
3 Select Reduce/Enlarge, and then press the button.
4 Select the desired settings, and then press the button.
• mm series
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
200%
A5A4(141%)
A5B5(122%)
100%*
B5A5(81%)
A4A5(70%)
50%