Troubleshooting 212
Copy Quality Problems
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Problem Action
There are spots in copies taken
from the document glass.
There is debris on the document glass. When scanning, the debris
creates a spot on the image.
Clean the document glass with a lint free cloth.
See also:
• "Cleaning the Scanner" on page 235
The reverse side of the original is
showing on the copy.
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto
Exposure" on page 126.
Light colors are washed out or
white on the copy.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto
Exposure" on page 126.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see
"Lighten/Darken" on page 124.
To Next Page
Loading...
Need help?
General