Basic Operation 44
Power Saver Mode
The printer has a power saving feature which reduces power consumption during periods of inactivity.
This feature operates in two modes: Low Power mode and Sleep mode. As delivered, the printer
switches to the Low Power mode five minutes after the last print job is printed. The printer then
switches to the Sleep mode after another six minutes of inactivity. When the printer is in the Low
Power mode, the LCD backlight turns off. In the Sleep mode, the (Energy Saver) button lights up.
The display goes blank and displays nothing.
The factory default settings of five minutes (Low Power mode) and six minutes (Sleep mode) are
changeable within the range of 5 to 30 minutes (Low Power mode) and 1 to 6 minutes (Sleep mode).
The printer returns to the ready-to-print state in about 25 seconds when re-activated.
See also:
• "Setting the Power Saving Timer Option" on page 177
To Next Page
Loading...
Need help?
General