Xerox DocuPrint CM205 b - Using the Numeric Keypad

Using the Operator Panel Menus and Keypad 178
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 Select System Section, and then press the button.
6 Select Yes, and then press the button.
The printer restarts automatically to apply the settings.